作者: Jir0917 (暴走阿仁 \_/#) 站內: RevivalBikes
標題: Re: [轉錄]NGK G-POWER 對照表
時間: Wed Aug 3 10:41:57 2005
※ 本文轉錄自 [NCKU-MOTOR] 看板
作者: Louis (阿芳) 站內: NCKU-MOTOR
標題: Re: [轉錄]NGK G-POWER 對照表
時間: Wed Aug 3 01:30:22 2005
我來補充一下好了
ＢＣ ＰＲ ８ Ｅ ＳＡ － １１
^^^^ ^^^^ ^^ ^^ ^^^^ ^^^^
一 二 三 四 五 六
(一) Thread Size / Hex Size
A : 18mm / 1" (25.4mm)
B : 14mm / 13/16" (20.8mm)
C : 10mm / 5/8" (16.0mm)
D : 12mm / 11/16" (18.0mm)
E : 8mm / 13.0mm
J : 12mm / 5/8" (18.0mm)
AB : 18mm / 13/16" (20.8mm)
BC : 14mm / 5/8" (16.0mm) JIS Type
BK : 14mm / 5/8" (16.0mm) ISO Type
DC : 12mm / 5/8" (16.0mm)
(二) Construction (One or more letters may be combined)
K : Hex Size 5/8" Projected Tip (ISO)
L : Compact Type (Shorty)
M : Compact Type (Bantam)
P : Projected Insulator Type
R : Resistor Type
U : Surface or Semi-Surface Discharge Type
Z : Inductive Resistor
(三) Heat Rating Numbers 2(hot) <----->12(cold)
(四) Thread Reach
E : 19mm (3/4")
EF : Tapered Seat 17.5mm (0.708" Reach)
FS : Tapered Seat 10.9mm (0.460" Reach)
H : 12.7mm (1/2")
EH : Partial Therad 19.0mm (3/4" Total Reach)
12.7mm (1/2" Total Thread)
L : 11.2mm (7/16")
S : 9.5mm (3/8") Reach
Z : 21mm
NO SYMBOL : 18mmo = 12mm Reach
14mmo = 9.5mm (3/8") Reach
(五) Thread Reach
A : Special Design
B : Special Design
C : Low Angle Ground Electrode
CM : Compact Type, Low Angle Ground Electrode
E : V-Grooved Center Electrode (14mm only) 1/5mm Insulator
ES : Standard 3/4" Thread Reach (2.5mm) Center Electrode
F : Tapered Seat
G : Fine Wire Nickel Alloy Center Electrode
G-G : Copper Core Ground Electrode
GP : Platinum Firewire (6mm)
GV : Gold-Palladium Center Electrode Special Construction
of V-Type Racing Use
IX : High Performance Iridium
K : 2-Ground Eectrodes
L : Half Heat Range
LM : Compact Type for Lawn Mower
M : 2-Ground Electrodes for Mazda Rotary Eng.
N : Special Side Electrode
P : Premium Platinum
Q : 4-Ground Electrodes
R : Special Ground Electrode
S : Standard 2.5mmo Center Electrode
T : 3-Ground Electrodes
U : Semi-Surface Discharge
V : Fine Wire Gold Palladium Center Electrode
VX : High Performance Platinum
W : Tungsten Electrode
X : Booster Gap
Y : V-Grooved Center Electrode (14mm only) 2.5mm Insulator
Z : Thick 2.9mmo Center Electrode
(六) Wide Gap
8 : 0.8mm (0.032")
9 : 0.9mm (0.036")
10 : 1.0mm (0.040")
11 : 1.1mm (0.044")
13 : 1.3mm (0.052")
14 : 1.4mm (0.055")
15 : 1.5mm (0.060")
20 : 2.0mm (0.080")
以上,我只是照著打,也沒管對錯,有點亂,加減看
--
╭┼ Origin: 玩車人的天地 ˙東吳機研站 scumotor.com.tw ┼╯ Author: Louis從 218-172-242-37.dynamic.hinet.net 發表
→ Jir0917推：這個好啊!!阿芳哥~借轉到老車板哩~:D 05/08/03