東吳機研站SCU MOTOR BBS DIGITAL ARCHIVE

作者: pooooo (916SP連油管都有快拆) 看板: BigBike
標題: Re: 請益有關於XENA
時間: Sun Jul  3 05:00:49 2005

※ 引述《anthonyio (FZ2 & 小螞蟻)》之銘言：
> > 要看鎖的位置，基本上這樣是正常的
> 哪個位置會讓警報器較敏感呢?
> 我是用一般碟煞鎖的方式鎖，
> 就是由下往上，鎖心在上頭扣住，鎖體在下方。
> 不過我不是鎖在外圈排削孔，是鎖在靠內圈那層的地方。
> 我這樣測試起來是不太敏感。
> 那請問鎖怎麼樣會感應的比較敏感呢??
轉載自手冊：
Functionality:
1. Your XENA alarmed disk lock  will activate in approximately 5
   seconds of placing the unit over your front or rear disc.
2. The unit will beep once to confirm arming.
3. Using an infrared transmitter and receiver linked to a
   microprocessor, your XENA will detect the presence or absence
   of a disk and arm or disarm accordingly.
4. Your XENA is equipped with movement and shock sensors. Moving
   the wheel or tampering with the unit while it is locked to your
   bike will set off the alarm.
5. Once activated the unit will emit 2 count-cown beeps, the siren
   will then sound for approximately 10 seconds. The unit will then
   re-set and re-arm.
Usage:
1. Place the key into the lock and rotate clockwise. The lock barrel
   will spring open.
2. Slide the unit over the front or rear disc brake.
3. The sensitivity of your XENA is dependant on the position on the
   disc. For the highest level of sensitivity, position the lock at
   the top of the disc. For a lower sensitivity level, lock you XENA
   at the bottom of the disc as illustrated in Figure 1. It may be
   necessary to experiment in order to achieve the optimum position
   for your desired sensitivity.

--
 ╭┼ Origin:  玩車人的天地 ˙東吳機研站  scumotor.com.tw 
 ┼╯ Author: pooooo 從 61-216-131-42.dynamic.hinet.net 發表
→ anthonyio 推：有沒有人可以翻譯一下下阿...                          05/07/03
→ anthonyio 推：我大概看一下好像也沒有提到                           05/07/03
→ anthonyio 推：關於怎麼鎖警報感應會比較敏感的部分                   05/07/03
→ gw 推：Usage第三段啊~                                              05/07/03